A Reverse Osmosis (RO) water purifier is a must-have appliance for clean, safe drinking water. However, like any machine, RO purifiers can sometimes face issues that affect their performance. Knowing the common problems and their fixes can save you time, money, and ensure your family always drinks healthy water.
In this blog, we’ll cover the 5 most common RO water purifier problems and how you can fix them easily.
👉 Need professional help? Book RO Service with Plumint
Problem:
If your RO purifier is not dispensing water, the most likely causes are:
Clogged filters
Faulty RO membrane
Low water pressure
Malfunctioning storage tank
How to Fix:
Check and replace clogged filters
Inspect the RO membrane and replace if needed
Ensure sufficient water pressure (at least 40-60 PSI)
If the storage tank bladder is faulty, it might need repair or replacement
Problem:
A noticeable decrease in water flow indicates:
Clogged pre-filters or membrane
Low air pressure in the storage tank
Sediment build-up
How to Fix:
Replace pre-filters every 6 months
Check RO membrane if it’s older than 1–1.5 years
Ensure tank air pressure is around 6–8 psi when empty
Tip: Regular maintenance avoids slow water output issues.
Problem:
If your purified water has an unpleasant taste or odor, the causes could be:
Worn-out carbon filters
Biofilm growth inside filters
Expired post-carbon filter
How to Fix:
Replace the carbon filters promptly
Sanitize the entire RO system once a year
Always install a new post-carbon filter with the membrane change
👉 Ensure best water taste – Schedule a RO maintenance at Plumint
Problem:
If your RO purifier keeps running non-stop:
The shut-off valve might be faulty
There could be a leak
The flow restrictor may be damaged
How to Fix:
Check the automatic shut-off valve (ASO) and replace if defective
Inspect for any leakage
Replace the flow restrictor if water is draining continuously
Problem:
Leaks from the purifier are usually due to:
Loose fittings or connectors
Damaged pipes
Faulty O-rings
How to Fix:
Tighten all fittings and pipe connections
Replace any damaged tubing
Change O-rings during annual maintenance to avoid leakage
Prevention is better than repair! Servicing your RO purifier every 6–12 months:
Keeps your filters and membrane in perfect condition
Ensures healthy drinking water
Prevents costly repairs in the future
👉 Book reliable RO service now with Plumint
Understanding these common RO water purifier problems and knowing their solutions helps you maintain your system efficiently. For issues beyond basic troubleshooting, always rely on trusted professionals to avoid damage.
Stay safe, and drink healthy water every day with a well-maintained RO purifier!
You should service your RO purifier every 6 to 12 months depending on the water quality and usage. Regular servicing ensures optimal performance and safe drinking water.
Some common signs include:
Bad taste or odor in water
Slow water flow
Continuous draining of water
Leaking purifier
Water not dispensing at all
If you notice any of these, it’s time to service your purifier.
Basic cleaning like wiping the exterior or replacing sediment filters can be done at home. However, for membrane or internal part cleaning, it’s best to call a professional to avoid damage.
No, using old filters can reduce purification efficiency, allowing harmful contaminants to pass through. This can compromise your health. Always replace filters as recommended.
A leaking RO purifier can lead to:
Water damage in your kitchen
Electrical hazards
Further damage to internal components
Prompt repairs help prevent bigger issues.
It is a long established fact that a reader will be distracted.
Boost your visibility and reach more customers by listing your business with us. It's quick, easy, and absolutely free! Join thousands of businesses benefiting from our platform.
Add My Business arrow_forwardCopyright © 2025 Plumint.